Showing all 12 results

600w x2 de HPS and MH including globes


600w x2 de HPS and MH including globes Features

With the New Nanolux DE Dual fixture (600Wx2), we have split our 1200W DE into two 600W lamp outputs. This allows
the fixture to run both a 2K DE HPS lamp and our brand new double jacketed 6K MH DE lamp, or the optional 4K MH DE
lamp (sold separately). This dual lamp combination provides a spectrum that is
unmatched by any other existing HID technology currently on the market. The spectral output of the 6K DE MH lamp in combination with the 2K DE HPS lamp provides additional
blue light that benefits your plant. This fixture provides a very comprehensive PAR spectrum
while pumping out 1200W of the most powerful light.
Use any combination of DE lamps to create the spectrum
the plants desire! (— >)2K-HPS + 6K-MH SPECTRAL DISTRIBUTION

380 430 480 530 580 630 680 730 780 Wavelength (nm)



CMH 1000w Including bulb


CMH 1000w Including bulb Features

Ceramic Metal Halide or CMH for short (some refer to it as CDM), is becoming more popular in the horticultural industry. The CMH lamps have a very broad light spectrum which is more similar to the sun itself than any other form of HID lamp. We have taken CMH technology and increased its operational efficiency, making the most comprehensive spectrum of light output for an HID fixture even better. The CMH lamps also have increased efficiency in PAR/Watt compared to other forms of HID lighting.
This was the first 1000W CMH fixture on the market. Nanolux helped develop the dual arc tube 1000W CMH MaxPar Lamp. The ballast is a low frequency ballast designed specifically to run low frequency CMH arc tubes. This fixture can be used as a standalone flowering fixture. The reflector is optimized and photometrically designed for an even commercial overlap pattern with a 136° aperture.

CMH 315w Including bulb


CMH 315w Including bulb Features

Nanolux Technology is now offering a CMH 315W ballast utilizing low frequency square wave technology. The ballast
has a 99% power factor rating making it highly efficient and also has open and short circuit protection. The CMH remote
ballast comes NCCS ready so it can communicate with the Nanolux NCCS wireless control system. Operates at 120‐240
volt and comes with a 120V IEC power cord. For 208‐240V operation a 240V cord has to be purchased or a Nanolux
120/240V adaptor can be used. The unit has a dual outlet lamp cord receptacle accepting both industry standards.
ETL Listed.
Fully sealed commercial designed ballast
NCCS Ready
3 year warranty
Soft Start and Random Start technology
Open circuit and low voltage protection
Input Voltage:

CMH 630w Including bulb


CMH 630w Including bulb

We are proud to bring you another first for South Africa – Ceramic Metal Halide CMH Grow Lights, the future of HID.

If you want to keep your edge you will need to stay up to date with the latest lighting technology. Out with the old and in with the new!

CMH metal halide grow lights are made with an arc tube constructed of a ceramic composite instead of quartz or PCA. This allows the tube to reach higher temperatures. To achieve the lower operating temperature in HID lamps made with quartz or PCA, a combination of gases must be used that don’t necessarily produce the optimal light spectrum for photosynthesis.



The DTU is the brain of the NCCS APP system and communicates and controls all of the selected functions in the grow room through wireless modem communication. The DTU controls lighting ballasts and environmental control devices by communicating wirelessly with individual RTU (remote terminal unit) USB devices.

Input Voltage DC : 3.3V-6V
Wireless Frequency : 433.5-434.5 MHz
Communication: Port > USB2.0
Measurement: 85mm * 150mm * 28mm
Weight: 142.4g
Controls: 999 RTU devices

HPS 1000w de 4×4 incl globes


fixtures in smaller non-commercial horticultural operations. Consumers have to realize that one of
the largest features of commercial open DE fixtures is their wide and large light footprint allowing for
“Commercial Overlap.” The light spread on a commercial DE fixture is well over 10’ wide in a typical
installation height. This is not practical if you are growing over a 4’ x4’ tray. The Nanolux DEFNC 4×4
fixture is designed to produce vertical light penetration over a 4’ x 4’ tray. The reflector is designed to
have ALL of the available light fall onto a 4’ x 4’ grid at a 24” install height over the canopy top. There
is no stray light falling beyond each side of the tray, as would be the case with our commercial DE
fixture. With the higher concentration of light falling onto the 4×4 grid, many growers report having to
dim the fixture—doing so also helps reduce power consumption.
This is the reason that we DO NOT offer our commercial DE fixtures in 120V presentations. If you are
using 120V, you are most likely using a limited number of fixtures (<10) which is generally NOT
considered a commercial installation and does not require the application of the commercial overlap or
its light interlacing effect.



The Nanolux DE Chill is the first DE commercial overlap fixture of its type on the market. The DE Chill is designed with
an onboard ballast, is air cooled, and comes NCCS APP‐ready. The air‐cooled design removes up to 60% of heat load in
grow facility environments. This greatly reduces the air conditioning required to maintain the growing environment at
desired temperatures. The fully enclosed design uses an optical quality glass lens which only reduces light output by
6%. This 6% reduction is easily offset by the ability to lower your lights closer to your plants and therefore raising light
intesities far above 20%. If left at the same height, one would only require 104 lights in a facility which would regularly
require 100 open‐style DE lights. The 4000W required to run the 4 additional lights and the small wattage draw for
exhaust fans is minor compared to the savings from lower electrical consumption required to AC the growroom.

HPS 1000w de OG incl globes


NEW for 2018 is the OG DE1000W fixture. Featuring all the same great benefits of our popular DE1000W fixture but in a more economical form. Unlike the standard DE1000W, the OG DE1000W is fan-cooled exactly like our bestselling OG1000W. By replacing the aluminum enclosure with a durable powder coated steel enclosure, we were able to make a complete DE fixture that weighs less and costs less that our original DE1000W. This makes the OG DE1000W the optimal choice for small scale growers that want all the benefits of DE lighting technology, for less cost. Reduced weight of the fixture makes the OG DE1000W ideal for hanging in grow tents. The OG DE1000W is compatible with both NCCS and 0-10V controllers and uses 97% German reflective reflector material. Comes with random start, soft start, and soft dimming capabilities.

Nanolux – HPS 1000 DE


The Nanolux DE has increased the standard 1150W to 1200W allowing the fixture to produce a class leading output. The upgraded components, like ceramic receptacles, made the Nanolux DE fixture the safest on the market. The Nanolux DE fixture is NCCS APP ready, meaning you will be able to control it wirelessly through the Nanolux Cloud Control System APP (NCCS). Like all of our ballasts, the DE comes with Random Start, Soft Start and Soft Dimming capabilities. The traditional commercial overlap reflector is designed to work on a 5’ on center application in conjunction with other DE fixtures. When used with the commercial DE reflector, the DE will create an interlacing light pattern with other lights. This interlacing allows for deeper light penetration and an 800 umol MIN/1000 umol MAX light coverage throughout the canopy area. This results in denser fruit and flower sets all over the plant, increasing the yield by as much as 10%. All Nanolux ballasts and fixtures are ETL listed meeting product safety standards.

Exclusive ceramic industrial grade receptacle
Strikes and is compatible with any industry DE MH or HPS lamp
Includes MAXPAR 2K HPS lamp
Designed for 5’ on center commercial overlap light grid
Soft/Random start plug and play technology
Lowest profile DE fixture on the market
Output Power: 1000W
Input Voltage: 208-240V, 277V
Input Current: 5.2-4.5A 3.9A
Bulb: DE
Dimming Settings: 600W, 660W, 750W, 825W, 1000W, 1200W
PF: >0.99
THDI: <10% CF: <1.7 Weight: 18 lbs
Size: 23”x 20”x 6”
Input Frequency: 50/60

Output Power: 600W
Input Voltage: 208-240V
Input Current: 3.2-2.8A
Bulb: DE
Dimming Settings: 300W, 450W, 600W, 660W
PF: >0.99
THDI: <10% CF: <1.7 Weight: 16 lbs
Size: 23”x19”x6”
Input Frequency: 50/60

Nanolux – HPS 600 DE


NanoLux 600W DE Complete Grow Fixture 208-240V Features

NCCS ready smart ballast technology
Heavy duty die cast bridge will not rust like formed
Lowest profile fixture on the market allowing for max plant height
Ballast and reflector can be separated for Remote DE ballast use
Class leading lowest operating temperature
Redesigned and upgraded reflector that provides 8% better light uniformity than the competition
Best in class 97% reflective German aluminum reflector
Exclusive ceramic industrial grade receptacles
The only wireless controlled DE on the market – no need for relays/light control panels, or timers
Plug and Play installation
Random Start, Soft Start and Soft Dim technology
Includes Nanolux DE bulb
Compatible with other industry DE Bulbs
Designed for a 5′ on center growing grid when used with the traditional square reflector
Slow Start, open circuit and low voltage protection
3 year warrantyNanoLux 600W DE Complete Grow Fixture 208-240V Specifications
Input Voltage: 208-240V, (other voltage models available in 240V) ( voltage models in 347 & 480V are special special order)
Output Voltage: 600 watts
Amperage Draw:
Input Frequency: 50/60Hz
Operational Frequency: >85kHz
THD: <10% PF: >0.99
CF: <1.7
Ta = 30c (86F)
Tc = 65c (149F)
Ballast and Fixture weight: 11.7lbs
Ballast and Fixture Dimension: 26.2″x12″x6.1″
Bulb: MaxPar 2100µmol DE Bulb

Nanolux – HPS 600 SE


NanoLux 600W SE Complete Grow Fixture 208-240V Specifications
Input Voltage: 208-240V, (other voltage models available in 240V) ( voltage models in 347 & 480V are special special order)
Output Voltage: 600 watts
Amperage Draw:
Input Frequency: 50/60Hz
Operational Frequency: >85kHz
THD: <10% PF: >0.99
CF: <1.7
Ta = 30c (86F)
Tc = 65c (149F)
Ballast and Fixture weight: 11.7lbs
Ballast and Fixture Dimension: 26.2″x12″x6.1″




The RTU is the data transfer communication device that is installed on the Nanolux Ballasts which allows them to communicate with the DTU. They receive information from the DTU communicating when to dim and turn on and off. They also send data back to the DTU on the status of the ballast.

Input Voltage DC: 3.3V-6V
Measurement : 24mm * 71mm * 24mm
Weight: 11.0g