Showing 1–16 of 31 results

BLUELAB EC PEN

R1,390.00

The ultimate handy solution for measuring conductivity (EC or ppm) and temperature!

The Bluelab Conductivity Pen simply tells you that your plants have the right amount of nutrient in your solution and lets you know if adjustments are needed. To feed plants well, we need to know what we’re feeding them. Start with a quality nutrient.

Measuring the conductivity every day is the best way to avoid over-diluting or over-concentrating your nutrient solution. Completely change the reservoir solution every 7 days. Top up the nutrient level between changes – so your plants always have the right amount of food.

The Bluelab Conductivity Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 – 22˚C or 65 – 72˚F is recommended.

To make sure the plants can get at the food, you need to measure the pH of the solution. Check out our handy Bluelab pH Pen so you have every tool required to manage your nutrient solution.

BLUELAB PH PEN

R1,580.00

The ultimate handy solution for measuring pH and temperature!

Plants get their nutrient from minerals but they can only get all the right minerals they need if certain conditions are right. Think of nutrients like a lock. pH is the key. A key factor that affects food uptake is whether your solution is acid or alkaline. We measure this in pH.

The Bluelab pH Pen also measures the temperature of the solution, as root health is vital to the success of a crop. Temperature affects the growth rate and structure of a plant so a solution temperature of 18 – 22˚C or 65 – 72˚F is recommended.

The hand held pH pen provides a compact quick and handy way to manage the success of your crop to ensure maximum uptake of nutrients.

Teamed with our Bluelab ppm or EC Pen, you have a handy, convenient and accurate system for ensuring optimum plant growth and health.

BLUELAB pH PROBE

R1,000.00

A replacement probe for Bluelab Combo and pH Meters, and Guardian Monitors

The Bluelab pH Probe is a replacement pH probe (electrode) suitable for use with Bluelab products that test the pH value of a solution.

Unfortunately pH Probes do not last forever as they age through normal use and will eventually fail. With good care and use (keeping the probe tip wet and cleaning once a month) you will extend its life.

The Bluelab pH Probe has a double junction reference which provides a longer life than many other pH probes and is a gel filled non-refillable probe, so apart from cleaning is maintenance free.

Replace only the pH probe, not the whole meter

pH probe manuals
Technical specifications
US-English-Flag  English

Probe cable length: 2 meters / 6.5 feetpH Probe Technical Specification Sheet

WARNING: This product can expose you to chemicals including Di (2-ethylhexyl) phthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov

 

 

BLUELAB SOIL pH PEN

R2,650.00

The ultimate handy solution for measuring soil pH and temperature!

The Bluelab Soil pH Pen provides a pH and temperature reading of soils and media, so you know that the right nutrients will be made available to your plants.

In soils or growing media, pH strongly influences the availability of the microorganisms to plants in the soil. Now you can closely monitor and adjust the pH levels to optimize plant health and performance.

It will also measure solutions too…

Now isn’t that Handy!

BLUELAB pH Probe KCl Storage Solution

R170.00R370.00

Use KCl storage solution with:

 

  • Bluelab pH Pens
  • Bluelab Soil pH Pens
  • Bluelab pH Probes
  • Bluelab Soil
  • pH ProbepH probes are sensitive glass instruments which age through everyday use.

 

BLUELAB CARE KIT pH

R270.00

Everything you need to clean, hydrate and calibrate pH probes

The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth.

Probe cleaning and correctly storing pH probes ensures you get the most accurate readings possible and will maximize the life of a probe.

The probe surface is where the instrument takes the reading of the solution or soil/media. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution or soil accurately.

pH probes specifically, should be kept wet at all times for optimal performance and life.

You can re-stock your probe care kit with bottles of Bluelab Solutions

pH & conductivity probe cleaning
Bluelab pH Pen Cleaning Instructions

Bluelab Soil pH Pen Cleaning Instructions

Bluelab pH & Soil pH Probe Cleaning Instructions

Product-User-Symbol-CleanProbe

Technical information

pH 7.0 calibration solution MSDS

pH 4.0 calibration solution MSDS

KCl storage solution MSDS

pH probe cleaner MSDS

 

BLUELAB CARE KIT CONDUCTIVITY

R220.00

Everything you need to clean and test conductivity (ppm/EC) / temperature probes

The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth.

Proper ppm/EC probe maintenance also ensures you maximize the life of the probe and instrument.

The probe surface is where the instrument takes the reading of the solution. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution.

A tip… if the conductivity reads low, the probe needs cleaning.

You can re-stock your probe care kit with bottles of Bluelab Solutions

Conductivity probe cleaning
Technical information
Bluelab Conductivity Probe Cleaning Instructions
Product-User-Symbol-CleanProbe

 

 

BLUELAB CARE KIT pH & CONDUCTIVITY

R440.00

Everything you need to clean and test conductivity (ppm/EC) / temperature probes

The instrument is only as accurate as the probe is clean. Accurate readings simplify crop management and provide improved growth.

Proper ppm/EC probe maintenance also ensures you maximize the life of the probe and instrument.

The probe surface is where the instrument takes the reading of the solution. If the probe face is dirty or contaminated, the readings may be inaccurate. Much like the windshield of a car, if it’s dirty you can’t see out! If the probe face is dirty, it cannot read the solution.

A tip… if the conductivity reads low, the probe needs cleaning.

You can re-stock your probe care kit with bottles of Bluelab Solutions.

Conductivity probe cleaning
Technical information
Bluelab Conductivity Probe Cleaning Instructions
Product-User-Symbol-CleanProbe

 

BLUELAB COMBO METER

R5,350.00

It’s all you need for simple and reliable crop management.

The Bluelab Combo Meter is a portable pH, conductivity and temperature meter all in one. If you are experiencing problems with yellow leaves, or slow stunted growth, the Bluelab Combo Meter will soon tell you if each parameter is within the plants requirements. Adjustments can be quickly made to get your crop back on track.

The Bluelab Combo Meter has two probes, a Bluelab pH Probe and a Bluelab Conductivity/Temperature Probe. When taking a reading, simply place them into the solution and the selected reading is displayed on screen. As the Bluelab Combo Meter is portable and does not require a power supply to operate, it can be used anywhere, anytime to help you manage your crops’ daily nutrient requirements.

Calibration of the pH probe is simple as instructions are supplied on the back of the meter and the easy push button method makes this one of the simplest meters to use.

The pH probe is replaceable so you can use this meter for years to come. The Conductivity/temperature probe does not require calibration as this is locked in during manufacture.

Often referred to as “The Cadillac of Meters”!

Bluelab combo meter plus

R5,650.00

Help Your Plants Grow – Fast, reliable and versatile: Combo Meter Plus means you will be able to measure more and build a better understanding of your complete growing system. The multimedia Leap pH probe can be used to measure nutrient solution and directly in the rootzone in a range of growing substrates including soil, rockwool, coco coir and peat.

Plant Health in the Palm of Your Hand – Manage, control & monitor your plant health & performance. The Bluelab Combo Meter Plus device will fit in the palm of your hand which will allow you to spot check wherever you are! The backlit, easy-to-read display and 2m/6’ cables give you the ability to measure in places previously inaccessible. Get answers at your fingertips.

Simple & Easy to use – This device is all you need for simple, reliable nutrient solution and root zone management. Featuring a detachable Leap pH probe with simple, 2-point calibration makes for ease maintenance. Get up and running fast. Quick and intuitive to use with simple one button presses to change between measurements. The Bluelab Combo Meter Plus a simple quick start guide to help you get started fast.

3 IN 1 Nutrient Solution Measurement-  Measures three key parameters to ensure your nutrient solution is at the right level and available to your plants. This 3 in 1 device will measure your pH levels, nutrient levels & temperatures directly in your solution, to optimise nutrient availability through the growing system.

Root Zone pH Measurement – The versatile Leap pH Probe allows for pH measurement directly in the root zone area as well as in solution.

BLUELAB CONNECT STICK 2

R2,380.00

Always Connected, always improving

Improve crop performance and reduce errors with the power of data and remote monitoring – stay connected to your crop, wherever you are.

Connect Stick 2 receives wireless data from Bluelab Connect devices for:

  • 24/7 connection to facility and crops
  • Easy device management in the Bluelab Connect software
  • Local data logging with cloud data logging backup
  • Remote monitoring through the Bluelab Connect mobile app.

If you’re always connected, you’re always improving.

Send wireless data to and from Connect device:

  • Up to 100m/330ft within the growing environment
  • Up to 400m/1312ft in open space.

Connect Stick 2 has 2x the wireless range compared to Connect Stick 1, and pair with Connect Range Extender 2 to increase wireless by 4x.

For use with:

  • Bluelab® Guardian Monitor Connect™
  • Bluelab® Guardian Monitor Connect™ Inline
  • Bluelab® pH Controller Connect™
  • Bluelab® Pro Controller Connect™
  • Bluelab® Connect™ Range Extender 1 & 2

 

Only one Connect™ Stick 2 required to receive wireless data from up to 50 Connect™ devices.

Connect stick getting started manual
Technical specifications
US-English-Flag  English, German, Spanish, French, Dutch

FREE Bluelab Connect Software available online

Product-User-Symbol-Wallmount
Data-Via-App-72px (002)
System requirements:
Microsoft Windows XP or greater for Bluelab Connect Software.
Internet connection for remote access & data logging to the cloud.Positioning Connect Devices

Connect Software Troubleshooting

WARNING: This product can expose you to chemicals including Vinyl
chloride, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

BLUELAB GUARDIAN MONITOR

R5,290.00

The simplest and most effective reservoir monitor you could ever own!

The Bluelab Guardian Monitor provides 24 hour continuous reading for pH, conductivity (EC/ppm 700/TDS/CF) and temperature within a nutrient solution.

Guardian monitor manuals and care

US-English-Flag  English

Probe Care:

Bluelab pH Probe Cleaning Instructions

Bluelab Conductivity Probe Cleaning Instructions
Optimizing these critical parameters through a plants’ growing phase helps ensure a successful crop.

Designed for indoor use, the Guardian Monitor can be mounted on a wall or hung on a support bar. Set up your reservoir, place the pH and conductivity probes in the solution, then adjust and glance!

Simply set high and low alarm states – if the solution moves away from the ideal range, the display flashes. A quick look at the monitor will let you know when your nutrient solution needs adjusting.

Product-User-Symbol-Wallmount
Technical specifications

Probe cable length: 2 meters / 6.5 feet

Bluelab Guardian Monitor Technical Specifications                      Guardian Monitor Troubleshooting Guide

WARNING: This product can expose you to chemicals including Vinyl chloride, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

 

BLUELAB GUARDIAN MONITOR CONNECT

R7,200.00

Stay connected – monitor, data log, and remotely view pH, conductivity and temperature readings

The Bluelab Guardian Monitor Connect is not only a constant indicator of the desired levels of pH, conductivity, and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you.
It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success.

Just one Bluelab Connect Stick is required to receive wireless data from one or more Guardian Monitor connects.
For remote or cloud access, the computer you are already data logging to will need permanent internet access.

 

US-English-Flag  English

Probe Care:

Bluelab pH Probe Cleaning Instructions

Bluelab Conductivity Probe Cleaning Instructions
Optimizing these critical parameters through a plants’ growing phase helps ensure a successful crop.

Designed for indoor use, the Guardian Monitor can be mounted on a wall or hung on a support bar. Set up your reservoir, place the pH and conductivity probes in the solution, then adjust and glance!

Simply set high and low alarm states – if the solution moves away from the ideal range, the display flashes. A quick look at the monitor will let you know when your nutrient solution needs adjusting.

Product-User-Symbol-Wallmount

 

BLUELAB GUARDIAN MONITOR CONNECT INLINE

R8,390.00

The Bluelab Guardian Monitor Connect Inline is not only a constant indicator of the desired levels of pH, conductivity, and temperature of your nutrient solution, it also data logs these critical parameters to your computer for you.
It does not stop there. You can access the data via the cloud from a remote mobile device or computer to check for extreme variances to ensure these critical parameters are hitting the mark for crop success.

Just one Bluelab Connect Stick is required to receive wireless data from one or more Guardian Monitor connects.
For remote or cloud access, the computer you are already data logging to will need permanent internet access.

• Easy to use monitor that measures pH, EC, and Temperature direct in your irrigation line
• Simple 1 button calibration for pH 7 and pH 4
• High-pressure pH probe – easy to clean and calibrate
• Data logs direct to your computer via wireless connection with Bluelab Connect Stick
• Personalized alarm settings
• 24/7 monitoring that will Email if anything goes wrong
• High-pressure in-line pH probe with 3/4? NPT thread
• Adapter collar to increase pH probe thread to 1? NPT
• Conductivity probe with 1? NPT thread
• View data and current status remotely via Connect Mobile App
(A computer with permanent internet access is required)

FREE Bluelab Connect Software available online

Applications
Applications-Aquaponics Applications-Floriculture Applications-Greenhouse Applications-Hydroponics Applications-Indstry
Aquaponics Floriculture Greenhouse Hydroponics Industry

Guardian monitor connect inline manual and care
Technical specifications
US-English-Flag English

Probe Care:

Bluelab pH Probe Cleaning Instructions

Bluelab Conductivity Probe Cleaning Instructions Product-User-Symbol-Wallmount Data-Via-App-72px (002)
Probe cable length: 2 meters / 6.5 feet

Download Technical Specification Sheet

Positioning Connect Devices

Connect Software Troubleshooting

WARNING: This product can expose you to chemicals including Vinyl chloride, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov

Bluelab-Connect-Stick-2-WEB(150279)You will need to purchase ONE Connect Stick 2

Just one Bluelab Connect Stick 2 is required to receive wireless data from one or more connect devices. Download the FREE Bluelab Connect Software to use with the Connect Stick 2.

Please purchase one Connect Stick 2 separately prior to check out.